Installation guide

Chapter 9 Network Device Driver Options 247
Racal-Datacom NI9210
The NI9210.OS2 driver is not supported on IBM PS/2 model 95
computers.
Required entry:
• drivername = ni9210$
The following table summarizes the possible entries and values in the
[ni9210] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
drivername — — ni9210$
maxmulticasts integer 1–16 10
maxreceives integer 1–6 3
maxtransmits integer 1–50 6
slot hex. 1–F See explanation
Entries in the [ni9210] section of the LAN Manager PROTOCOL.INI
file have the following meanings:
drivername
Identifies the device driver name.
maxmulticasts
Specifies the number of multicast addresses that the driver supports.
maxreceives
Specifies the number of receives that can be queued simultaneously.
maxtransmits
Indicates the number of transmit chain commands that can be queued
simultaneously.
slot
Specifies the number of the slot in the computer where the network
adapter resides. This entry is not necessary if there is only one NI9210
adapter in the system. It is required if there is more than one NI9210
adapter.