Installation guide

256 Installation Guide for Clients
Standard Microsystems SMC 80x3 Adapters
Required entry:
• drivername = smcmac$
This driver is for the following network adapters:
• SMC 8003EP
• SMC 8003EPC
• SMC 8013EPC
• SMC 8013EWC
• SMC 8013WC
The following table summarizes the possible entries and values in the
[smcmac] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
drivername — — smcmac$
irq integer 2-15 3
iobase hex. 200-3E0 280
maxrequests integer 6-24 8
maxtransmits integer 6-24 12
ramaddress hex. A000-FC00 D000
receivebuffers integer 6-24 12
receivebufsize integer 256-1536 1024
receivechains integer 6-24 12
slotnumber
(Micro Channel
only)
integer 1-10 4
Entries in the [smcmac] section of the LAN Manager PROTOCOL.INI
file have the following meanings:
drivername
Identifies the driver name.
irq
Identifies the interrupt level of the network adapter. This value should
match the configuration of the adapter, or an error message will be
returned.
iobase
Indicates the I/O base port number as set by the configuration
switches.