Installation guide

Chapter 9 Network Device Driver Options 257
maxrequests
Specifies the number or general request queue entries. If this
parameter is not defined, the value will default to 8.
maxtransmits
Specifies the number or transmit queue entries. If this parameter is not
defined, the value will default to 12.
ramaddress
Indicates the base address of the shared memory on the network
adapter.
receivebuffers
Specifies the number of receive queue entries. If this parameter is not
defined, the value will default to 12.
receivebufsize
Specifies the size, in bytes, of a receive buffer. If this parameter is not
defined, this value will default to 256.
receivechains
Specifies the size, in bytes, of receive chain header queue entries. If
this parameter is not defined, this value will default to 12.
slotnumber (Micro Channel only)
Indicates the number of the slot containing the network adapter in a
Micro Channel system.
Note The SMC 8013EWC adapter cannot be used in a Micro
Channel system.