Installation guide

Chapter 9 Network Device Driver Options 269
Ungermann-Bass UBNEA
Required entries:
• adaptertype = Access/PC-8, Access/PC-16, or Access/MC
• drivername = ubnea$ or ubnean$
This driver supports the following adapters:
• Ungermann-Bass Access/PC-8
• Ungermann-Bass Access/PC-16
• Ungermann-Bass Access/MC
The following table summarizes the possible entries and values in the
[ubnea] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
adaptertype — — See explanation
drivername — — ubnea$ or ubnean$
io_port hex. See explanation 300
irq_level — See explanation 3
maxmulticast — 0–255 16
maxtransmits — 1–400 8
receivebuffers — 16–512 64
receivebufsize bytes 256–1514 600
receivemethod — See explanation ReceiveChain
slotnumber
(Access/MC only)
— 1–8 See explanation
Entries in the [ubnea] section of the LAN Manager PROTOCOL.INI file
have the following meanings:
adaptertype
Specifies the type of Ungermann-Bass network adapter installed on
the system. This field must be set to Access/PC-8, Access/PC-16, or
Access/MC.
drivername
Identifies the driver name of the network device driver. The base
portion of the filename, plus a digit when more than one driver is
installed, is the drivername. The drivername is ubnea$ for the first
driver, ubnea2$ for the second, and so on.