Installation guide

297
APPENDIX A
The LAN Manager
Root Directory
This appendix discusses the files that make up the LAN Manager
software. Specifically, it describes the LAN Manager root directory,
usually C:\LANMAN or C:\LANMAN.DOS, and its subdirectories.
The contents of the LAN Manager root directory differ depending on
whether the workstation is running LAN Manager Enhanced,
LAN Manager Basic, or LAN Manager for OS/2. This appendix
describes the directory contents for the version of LAN Manager running
on each computer type.
What the LAN Manager Root Directory Contains
When you install the LAN Manager software, the LAN Manager root
directory is created on the hard disk. During the installation procedure,
you can specify a path for the LAN Manager directory that is different
from the default path.
Note If your computer already works on a Windows NT LAN Manager
network but you don’t know where the LAN Manager software is on the
hard disk, type path at the OS/2 or MS-DOS prompt. One directory on
your computer’s search path will be called NETPROG. If you are using
LAN Manager Basic on a computer with MS-DOS, the path ending with
the BASIC directory is the path of the directory containing the
LAN Manager Basic software.If you are using LAN Manager Enhanced
for MS-DOS, the path ending with the NETPROG directory is the path
of the directory containing the LAN Manager software.