Installation guide

304 Installation Guide for Clients
LANMAN.DOS Basic Directory
The LANMAN.DOS Basic directory for an MS-DOS workstation
includes the following subdirectories and files:
The LANMAN.DOS\BASIC Directory
Contains the programs that run the LAN Manager Basic services.
The LANMAN.DOS\DRIVERS Directory
Contains the device drivers and the network-information files for
network adapters. This directory is explained in “The
LANMAN.DOS\DRIVERS Directory” section, earlier in this
appendix.
The LANMAN.DOS\REDIRS Directory
Contains REDIR.* files for different versions of MS-DOS. The file
for the version running on the workstation will be copied to the
NETPROG directory and renamed REDIR.EXE.
The SETUP.EXE File
Contains the Setup program.
The SETUP.INF File
Contains information required by the Setup program.
The SETUP.INI File
Contains a history of the configuration settings for the Setup
program. Do not edit this file.
The SETUP.MSG File
Contains messages required by the Setup program.
The LANMAN.DOS\BASIC Directory
The LANMAN.DOS\BASIC directory contains LAN Manager Basic
programs and commands. The Setup program adds this directory to your
search path when the LAN Manager Basic software is installed.
LAN Manager Basic uses the files in LANMAN.DOS\BASIC to run the
workstation and perform tasks. Don’t type these filenames as commands.
The LANMAN.DOS\BASIC directory contains the following files:
CHKNET.EXE
Tests whether the network is already started.
LANMAN.INI
Configures the LAN Manager Basic software. For more information,
see Appendix B, “The LANMAN.INI File.”
LOAD.COM
Loads protocols.
MINSES.EXE
Provides the interface between the workstation software and the
network drivers.