Installation guide

306 Installation Guide for Clients
The LANMAN\ SERVICES Directory
Contains the programs that run the LAN Manager services.
The SETUP.EXE File
Contains the LAN Manager Setup program.
The SETUP.INF File
Contains information required by the Setup program.
The SETUP.INI File
Contains a history of the configuration settings for the Setup
program. You should not edit this file.
The SETUP.MSG File
Contains messages required by the Setup program.
The UPGRADE.INF File
Contains information required by the Setup program during upgrades.
The remainder of this section discusses the contents of the LANMAN
directory for an OS/2 workstation.
The LANMAN\DRIVERS Directory
The LANMAN\DRIVERS directory holds the network device drivers
and the network-information files for network adapters.
There are two types of device drivers: protocol device drivers and
media-access control device drivers. Protocol drivers work as
intermediaries between LAN Manager and media-access control drivers.
Media-access control drivers work as intermediaries between protocol
drivers and the network adapters. For further information about
network-device drivers, see Chapter 8, “About Network Device
Drivers,” and Chapter 9, “Network Device Driver Options.”
The LANMAN\DRIVERS directory contains the following
subdirectories:
BASEBAND
Contains media-access control drivers for baseband network adapters,
if a baseband network-adapter is installed.
ETHERNET
Contains the media-access control drivers for Ethernet network
adapters, if an Ethernet network-adapter is installed.