Installation guide

332 Installation Guide for Clients
The [loadopts] Section (MS-DOS Only)
The [loadopts] section allows you to select how LAN Manager
Enhanced services are loaded into memory. By default, the services you
specify in the [services] section are loaded into upper memory blocks
(umbs) as available. In the [loadopts] section, you can set each service to
load either low or umb. The format is:
service = {low | umb}
The [services] Section
The [services] section of the LANMAN.INI file lists the paths to all the
available LAN Manager services. The services are the components of
LAN Manager, such as the Workstation service and the Messenger
service, that perform the tasks of LAN Manager. LAN Manager checks
the values in the [services] section when you start a service.
If a path used in this section does not start with a drive name or a
backslash, it is assumed to be relative to the LANMAN directory.
The [services] section contains the following entries, which should
appear in the order listed here:
workstation
Is the path of the Workstation service initialization program. The
value for this entry is SERVICES\WKSTA.EXE.
messenger
Is the path of the Messenger service initialization program. The value
for this entry is SERVICES\MSRVINIT.EXE.
netpopup
Is the path of the message popup program. The value for this entry is
SERVICES\NETPOPUP.EXE.
Note The [services] section of the MS-DOS LANMAN.INI file for
LAN Manager Enhanced has the Workstation, Messenger, and
Netpopup services and some additional entries. For the additional
entries, see the “LANMAN.INI File for LAN Manager Enhanced”
section, later in this appendix.