Installation guide

336 Installation Guide for Clients
Summary Tables
The summary tables provide the range and default values for default,
optional, and autotuned entries in the LANMAN.INI file. See the
descriptions of entries earlier in this appendix for more information. A
value of 65535 for an entry means “forever” or “no limit.” Some entries
can also have a value of –1. The –1 value is noted in the discussion of
entries that can have this value; it usually has an effect similar to 65535,
of removing a limit.
The [networks] Section for MS-DOS
For information about the values of the entries for this section, see “The
[networks] Section for MS-DOS” section, earlier in this appendix.
The [networks] Section for OS/2
For information about the values of the entries for this section, see “The
[networks] Section for OS/2” section, earlier in this appendix.
The [workstation] Section
Default entry Units Range/value Default value
computername characters 1–15 —
domain characters 1–15 DOMAIN
othdomains domain names as many as 4 other
domains
—
wrkservices service names no value to list from
[services]
MESSENGER,
NETPOPUP
Optional entry Units Range/value Default value
charcount bytes 0–65535 16
chartime milliseconds 0–65535000 250
charwait seconds 0–65535 128 {3600}
himem
1
string yes/no/optional no
keepconn seconds 1–65535 600
keepsearch seconds 1–65535 600
lanroot
1
pathname — C:\LANMAN.DOS
lim
1
string yes/no yes
maxcmds integer 3 – 255 {5–255
minimum = (5
*
#
of wrknets)}
11 {16}