Installation guide

352 Installation Guide for Clients
PROTOCOL.INI Options
The following table summarizes the possible entries and values in the
[msdlc_xif] section of the LAN Manager PROTOCOL.INI file. Required
PROTOCOL.INI entries are drivername, bindings, load, and unload.
Entry Units Range Default
adaptrate milliseconds 0–65535 0
bindings drivers — no default
bufqelements buffers 1–2048 64
class1timeout seconds 0–65535 120
commands descriptors 1–255 24
denysaps — 0x02–0xFE 0xF0
drivername — — msdlc$
ipackets packets 1–1000 24
load — — msdlc[ub]
looppackets packets 1–1000 2
maxgroup packets 1–126 0
maxin packets 1–127 1
maxmember packets 1–127 0
maxout packets 1–127 12
msdlcretries retries 1–65535 8
saps — 1–255 2
stacksize bytes 512–4096 2048
stations — 1–255 20
swap — 0–1 1
timers timers 1-255 12
t1_tick_one 40 milliseconds 1–255 5
t1_tick_two 40 milliseconds 1–255 25
t2_tick_one 40 milliseconds 1–255 1
t2_tick_two 40 milliseconds 1–255 10
ti_tick_one 40 milliseconds 1–255 25
ti_tick_two 40 milliseconds 1–255 125
trxbuffers buffers 0–32 0
trxbufsize bytes 0–16000 0
uipackets packets 2–300 16