Installation guide

49
CHAPTER 5
Setup Screen Basics
Whenever you need to review or change the configuration of an
existing LAN Manager workstation, you use the LAN Manager Setup
program’s menu interface, called the LAN Manager Setup screen.
This chapter describes how to use the LAN Manager Setup screen.
Starting the Setup Screen
If this is an MS-DOS computer, start from the MS-DOS command line.
Note If you are using the Microsoft Windows operating system, do not
run LAN Manager Setup in the Windows “MS-DOS Prompt” window.
Exit the Windows operating system before running LAN Manager
Setup.
If this is an OS/2 computer, start from an OS/2 window or full screen
session.
Û To access the LAN Manager Setup screen
1. Make the LAN Manager directory the current directory.
For example, if the LAN Manager software is installed in
C:\LANMAN, you would type: