Installation guide

50 Installation Guide for Clients
2. From the LAN Manager directory, start the Setup screen. Type setup
and press ENTER.
If the computer has a monochrome or plasma screen, type setup
/mono and press ENTER.
The LAN Manager Setup screen is displayed.
Using Setup Screen Menus
Follow these steps when using Setup screen commands.
Û To issue commands from the Setup screen
1. Select a menu in one of these ways:
• Click a menu name.
Note The mouse cannot be used with IBM OS/2 2.0.
• Hold down ALT and press the key corresponding to the letter
highlighted or underlined in the menu name.
• Press F10 or ALT, select a menu by pressing the LEFT or RIGHT ARROW
keys, and then press ENTER.
When a menu is selected, it drops down and displays its available
commands.
2. Choose a command from the displayed menu in one of these ways:
• Click the command.
Note The mouse cannot be used with IBM OS/2 2.0.