Installation guide

Chapter 5 Setup Screen Basics 53
Exiting the Setup Screen
The LAN Manager menu’s Exit Setup command returns you to the
MS-DOS or OS/2 command line.
Û To exit the LAN Manager Setup screen
1. Complete and close any open dialog boxes.
2. From the LAN Manager menu choose Exit Setup, or press F3.
If you have changed the LAN Manager configuration during this
session in the Setup screen, the LAN Manager Configuration
Complete dialog box appears, instructing you to reboot the computer
after exiting Setup.
3. Choose the OK button, and then reboot as instructed.
The new configuration takes effect when the computer is rebooted.
For details about using the Setup screen menus, commands, and dialog
boxes to manage a LAN Manager configuration, proceed to Chapter 6,
“Managing an MS-DOS Workstation,” and Chapter 7, “
Managing an
OS/2 Workstation.”