Installation guide

57
CHAPTER 6
Managing an MS-DOS
Workstation
This chapter describes the LAN Manager Setup screen for MS-DOS
computers. Using the Setup screen, you can review and change the
configuration for LAN Manager Enhanced and LAN Manager Basic
workstations.
The LAN Manager Setup screen for MS-DOS computers has four
menus: LAN Manager, Configuration, Connectivity, and Help, as
shown in the following illustration.
For instructions on starting or exiting the Setup screen, and on using
commands from the Setup screen menus, see Chapter 5, “
Setup Screen
Basics,”
and Chapter 1,
“Introduction.”
This chapter describes procedures for reviewing and making
configuration changes. It does not discuss specific configuration choices
you will make. For explanations of those configuration choices, for
information about the entries you will make and parameters you will
select using the procedures in this chapter, and for associated planning
materials, see Chapter 2, “Planning for Installation and Configuration.”