Installation guide

64 Installation Guide for Clients
9. If you made no changes, the Setup screen returns and you are
finished. If you changed the TCP/IP settings, the Configuration
Complete dialog box appears:
10. If you made no changes in any of the preceding steps, the Setup
screen returns and you are finished. If you made any changes, the
Configuration Complete dialog box appears.
• To save the changes you made, choose the Save button. The
changes are saved and the Setup screen returns.
• To return to the Workstation Configuration dialog box, choose the
Review button. There you can review, change, accept, or cancel
the changes you made (beginning again at step 2).
Û To add a network device driver configuration
1. From the Configuration menu, choose Network Drivers.
The Workstation Configuration dialog box appears, showing you this
computer’s network device driver configurations: