Installation guide

68 Installation Guide for Clients
10. If you made no changes in the preceding steps, the Setup screen
returns and you are finished. If you made any changes, the
Configuration Complete dialog box appears.
• To save the changes you made, choose the Save button. The
changes are saved and the Setup screen returns.
• To return to the Workstation Configuration dialog box, choose the
Review button. There you can review, change, accept, or cancel
the changes you have made (beginning again at step 2).
Û To remove a network device driver configuration
1. From the Configuration menu, choose Network Drivers.
The Workstation Configuration dialog box appears, showing you this
computer’s network device driver configurations:
2. Select the network device driver configuration you want to remove. A
configuration consists of a network adapter driver and one or more
protocols bound to it.
Select a configuration by clicking it, or by pressing the UP and DOWN
ARROW
keys. If necessary, you can scroll through the list of
configurations by clicking the scroll bar or by pressing the PAGE DOWN
and PAGE UP keys.
The selected configuration is highlighted. Selecting the network
adapter driver or any of the protocols bound to that driver is the same
as selecting that entire network device driver configuration.