Installation guide

Chapter 6 Managing an MS-DOS Workstation 75
5. If you made any changes to any of the dialog boxes, the Configuration
Complete dialog box appears last, asking you to save or review the
changes you made.
• To save the changes you made, choose the Save button. The
changes are saved and the Setup screen returns.
• To return to the Workstation Settings dialog box, choose the
Review button. There you can review, change, accept, or cancel
the changes you made (beginning at step 2).
Installing or Managing Connectivity Services
You install and manage LAN Manager connectivity services using the
Connectivity menu. The Install command always appears on the
Connectivity menu. The NetWare Service command appears on the
menu only after those services have been installed.
Û To install a connectivity service
1. From the Connectivity menu, choose Install. The Insert Disk dialog
box appears:
2. As instructed by the dialog box, insert the connectivity service Setup
disk in the disk drive or type a path to the connectivity service’s
Setup software, and then choose the OK button.
3. Follow the instructions that appear on your screen. For more
information, see the connectivity service’s manual(s) or use the
connectivity service’s online help.
When you finish installing and exit the connectivity service Setup
screen, the LAN Manager Setup screen reappears.