Installation guide

76 Installation Guide for Clients
Û To manage the NetWare service
1. From the Connectivity menu, choose NetWare Service. The NetWare
service Setup screen appears.
2. Review and change the settings as necessary. For instructions, see the
NetWare Connectivity Guide or use online help.
When you complete your review and exit the NetWare service Setup
screen, the LAN Manager Setup screen reappears.
Removing LAN Manager
You use the LAN Manager menu’s Remove command to remove
LAN Manager from the computer.
Remove LAN Manager when you no longer want this computer to be a
LAN Manager workstation, or when you are installing new
LAN Manager software and you prefer to create a new LAN Manager
configuration.
The Remove command:
• Removes any installed connectivity services.
• Removes LAN Manager information from this computer’s
CONFIG.SYS, AUTOEXEC.BAT, and, if the Microsoft Windows
operating system is installed, WIN.INI files.
• Deletes the LAN Manager files from the hard disk.
Before removing LAN Manager, you must:
• Exit Microsoft Windows (if it is running on your computer).
• Stop the Workstation service for an Enhanced workstation.
It is a good idea to save files by copying them to another directory or to
a removable disk before removing LAN Manager. For example, you
might want to save:
• Third-party network device drivers (not originally provided with
LAN Manager) located in the LANMAN.DOS\DRIVERS directory
and subdirectories
• CONFIG.SYS, AUTOEXEC.BAT, and all *.INI files in the
LAN Manager directory
Removing LAN Manager also removes any installed connectivity
services, so you may also want to back up any connectivity services
configuration information and remove any connectivity services
software before removing LAN Manager.