Installation guide

Chapter 7 Managing an OS/2 Workstation

8. If the TCP/IP protocol is included in one of the configurations, and if

you chose the OK button in the Workstation Configuration dialog

box, the TCP/IP Settings dialog box appears:

Review or edit the TCP/IP Settings dialog box as necessary, and then

choose the OK button. If you made no changes, the Setup screen

returns and you are finished. If you changed the TCP/IP settings, the

Configuration Complete dialog box appears:

9. If you made no changes in any of the preceding steps, the Setup

screen returns and you are finished. If you made any changes, the

Configuration Complete dialog box appears.

• To save the changes you made, choose the Save button. The

changes are saved and the Setup screen returns.

• To return to the Workstation Configuration dialog box, choose the

Review button. There you can review, change, accept, or cancel

the changes you made (beginning again at step 2).