Installation guide

Chapter 7 Managing an OS/2 Workstation 87
3. Select a network adapter driver.
• If the list contains the needed network adapter driver, select the
driver by clicking it or by pressing the UP or DOWN ARROW key until
the driver is highlighted.
After the driver is selected, choose the OK button.
• If the list does not contain the needed network adapter driver, and
if you have a supplemental drivers disk containing that driver, you
can copy the driver to the computer by choosing the Other Driver
button and following the instructions that appear on your screen.
Copying a driver automatically chooses that driver for this new
configuration.
Contact the manufacturer of your network adapter if you do not
have a needed network adapter driver.
When the network adapter driver is chosen using one of the above
procedures:
• If the selected network adapter driver is not monolithic, the
Network Protocols dialog box appears. Proceed to the next step.
• If the selected network adapter driver is monolithic, the
Workstation Configuration dialog box returns. Skip to step 7.
4. The Network Protocols dialog box shows you the protocols available
on this computer. If necessary, you can scroll through the list of
protocols by clicking the scroll bar or by pressing the PAGE DOWN and
PAGE UP keys.