Specifications

7-24
Alignment & Adjustments
Samsung Electronics
Service Manual
7.7.2.6 Test Print
This function allows you to test the overall function of the print engine. You can select either a 4 * 4 color bar pattern or a
solid color pattern. If the solid pattern is selected 4 pages are printed - one for each color. You can also print the EDC
Mode Menu Map.
<How to operate>
a) Press the "<" or ">" key until "Test Print" is displayed.
b) Press the "Enter" key to select this function.
c) Press the "<" or ">" key until "Select Tray" is displayed.
d) Press the "Enter" key to select this function.
e) Press the "<" or ">" key until required tray is displayed and then press the "Enter Key"
f) Press the "Upper Level" key.
g) Press the "<" or ">" key until "Select Pattern" is displayed.
h Press the "Enter" key to select this function.
i) Press the "<" or ">" key until required pattern is displayed and then press the "Enter Key"
j) Press the "Upper Level" key.
k) Press the "<" or ">" key until "Print Pattern" is displayed.
l) Press the "Enter" key to print the pattern.
For safety - after printing a test pattern if you need to return to EDC mode turn the printer off and then re-enter EDC
Mode by turning power on whilst holding in the "Enter" key.