Specifications

8-13
Samsung Electronics
Troubleshooting
Service Manual
8.3.7 Paper rolling in the Fuser.
Symptoms
Paper is rolled in the Fuser.
Check and Cause Solution
1. If the Heat Roller is conteminated.
(Background, Hot off set)
2. If “Accordion” folding occurs between the Fuser and
the Exit Unit repeatedly.
3. If the Bearing - Fuser or Gear - Fuser is damaged or
melted by excessive heat.
1. Replace the Fuser.
2. Check if the Paper Guide Ribs on the Exit Unit are
damaged or contaminated, and check the condition
and operation of the Exit Roller.
3. Check the SMPS and Main PBA if the Bearing Gear
is melted.