Specifications

8-22
Troubleshooting
Samsung Electronics
Service Manual
8-22
Chapter 8. Troubleshooting
Samsung Electronics
Jam In Duplex Path
Paper is caught while printing side 2.
1. Open the Duplex Cover and then remove the paper.
2. Remove any foreign objects in the Duplex Path.
Jam In Exit Area
Paper is caught in the Exit Area.
1. Check the Exit Sensor actuator.
--> Replace the Fuser if the Exit Sensor actuator is damaged or bent.
2. Check that the Paper Guide Rib of the Output Guide is clean, and not damaged or distorted.
--> Replace the Fuser or Exit Ass'y if it is not normal.
3. Check the condition and operation of the Fuser Rollers.
Jam Inside Printer
Paper is caught inside printer
1. Open the Duplex Cover and then remove the paper.
2. Check the Feed sensor actuator.
--> Replace the Feed Sensor if it is damaged or distorted.
Load Manual
Press Cont Key
This is only displayed when printing in Manual Feed mode and the
MPF tray is empty..
Load a sheet of print material and press the On-Line/Continue button. You need to press the button for each page to
be printed.
Load [Size] In [Tray]
The size of paper in the tray and the size of paper required by the doc-
ument being printed are different.
*In this case the size of paper and tray is indicated.
Load the correct size of paper.