Specifications

8-25
Samsung Electronics
Troubleshooting
Service Manual
Replace Toner [Color]
It occurs when the Toner Cartridge of indicated Color is not installed.
*If the Toner Cartridge does not be installed
*The value of OEM Resistor be recognized by the value of opened due to the contamination of Contact point.
1. Open the Deve Cover and then check if the Toner Cartridge is installed.
2. Check if the contact point is contaminated.
3. Replace the Toner Cartridge.
4. Replace the OEM PBA, HVPS and Main PBA in order.
Tray2 Error
This occurs when Tray2 is not installed correctly.
Turn the printer off and re-install Tray2.
Tray2 Jam Cover Open
The cover on Tray 2 is open.
Check and ensure that the cover of Tray2 is closed properly.
Waste Toner Full/Not Install
Waste Toner Tank is full or not installed.
1. Check and replace the Waste Toner Tank or install it correctly.
2. Check that the Waste Toner Sensor actuator lever is free and not damaged or distorted.
3. Check the condition of the waste toner sensor cable harness and refit or replace if it is damaged.