Specifications

5-4
System Outline
Samsung Electronics
Service Manual
2) Developing state of color
The page image is built up from each of the 4 colors and transferred to the paper as described below.
> Developing sequence: Y, M, C, and K
1) A latent image containing only yellow toner is
created on the OPC drum and then transferred
onto the ITB.
2) A latent image containing only magenta toner
is created on the OPC drum and then trans-
ferred onto the ITB to add to the yellow image
already in the ITB.
3) A latent image containing only cyan toner is
created on the OPC drum and then transferred
onto the ITB, adding to the 2 colors already
present on the ITB
4) A latent image containing only black toner is
created on the OPC drum and then transferred
onto the ITB, creating an image on the ITB
consisting of the 4 colors.
5) The Image on the ITB is secondly transferred
onto paper using the T2 transfer roller.
6) The image on the page is then fused and the
paper is ejected into the output tray.
3) Toner cartridge empty detection
Software Dot count.
Developing and Image Transfer
Developing and Image Transfer
Developing and Image Transfer
Paper Take-up
Fusing
Cleaning of
Image Transfer Belt
Paper Exit
Image Transfer to page
Developing and Image Transfer
Yellow ColorYellow Color
Magenta ColorMagenta Color
Cyan ColorCyan Color
Blacl BolorBlack Color