Specifications

6-19
Samsung Electronics
Disassembly and Reassembly
Service Manual
6.4.4 Duplex Cover Ass'y and Transfer Roller (T2)
>> Before disassembling it:
* Open the duplex cover, the DEVE cover and the exit cover. (Refer to 6.3.3)
* Remove the front cover and top cover. (Refer to 6.4.1)
* Remove the rear cover. (Refer to 6.4.3)1)
1) Release 2 hinge screws (3*10 silver) - one on each side of the duplex unit.
2) Remove the duplex cover ass'y by pulling it in the direction shown by the arrows in A and B below.
* A: Lift up the left side section.
* B: Remove the duplex cover ass'y by pulling the right side section towards the left.
Screw
Duplex Assy
A
A
B
B