Specifications

6-41

Samsung Electronics

Disassembly and Reassembly

Service Manual

6.4.17 Waste toner ass’y

>> Before disassembling it:

* Disassemble a front cover and a top cover. (Refer to 6.4.1)

1) Release 6 screws (3*10 silver).

* Upper part: 4 screws * Lower part: 2 screws

2) Remove the waste toner ass'y by first reaching into the OPC cavity and lightly depressing the waste

toner receiver whilst at the same time gently pulling the waste toner motor assy away from the set. Once

the ass'y is released refer to the photograph and remove the ass'y.

Caution: * It is very likely that waste toner will be spilled when removing the waste toner ass'y.

Screw

OPC Lifter