Specifications

6-45
Samsung Electronics
Disassembly and Reassembly
Service Manual
3) Remove the 3*8 black screw retaining the Guide Pick-Up plate. Using a small flat bladed screwdriver or
similar tool force the brass ground plate off the retaining lugs and bend it upward slightly. Release the
Eraser Lamp harness and paper Empty Sensor harness, these pass between the main engine frame and
base frame and cannot be removed.
4) Remove the “ACTUATOR-EMPY (JC72-00465A)” sensor arm and then take out the “Pick-up Ass’y” by
lifting the right hand side and sliding the shaft from the frame.
Screw
Ground Feed
Guide Pick-Up Plate