User`s guide
Editing a Configuration
Applying Wildcard Capability to Attributes
Creating and Managing Configurations
4-42
Enterprise Configuration Manager
User’s Guide
Figure 4-16. List Attributes in the Configuration Attribute List
Device-Component Attributes
A configuration can have the same attribute (though a different instance of it)
for each instance of a device component (for example, device ports). These are
called device-component attributes.
Both in the Insertable Attributes list and in the configuration attribute list,
device-component attributes are identified by a number after the device name,
indicating the different instances of the component in the configuration. All of
the attributes in Figure 4-17 are device-component attributes.
Figure 4-17. Device-Component Attributes in the Insertable Attribute List
The attributes listed in Figure 4-17 and Figure 4-18 apply only to port 1. After
the listing for port 1, you could have a listing for port 2 with all the same
insertable attributes, and so on.
Device Attribute Flags Value
UDP2_App udpLocalPort. 0.0.0.0.160 R 160
UDP2_App udpLocalPort. 0.0.0.0.161 R 161
UDP2_App udpLocalPort. 0.0.0.0.162 R 162
UDP2_App udpLocalPort. 0.0.0.0.7 R 7
Flags Device Insertable Attribute
R CSIIfPort.1 ifOutUcastPkts
R CSIIfPort.1 ifSpeed
R CSIIfPort.1 ifType
RW CSIIfPort.1 ip_address