User`s guide

9030944 E10 Loading a Configuration
5-3
Selecting Devices and Configurations
Three Ways to Specify Devices to be Loaded
How to Change a Device Specific Configuration to a Shared One, on
Page 5-21).
Three Ways to Specify Devices to be Loaded
Once you have chosen either device specific or shared configuration(s) as your
type of configuration (by going to the appropriate option in the ECM Main
window), you then have the following ways to load the configuration(s) to a
device(s) of the type selected in SPECTRUM:
• As one device specific configuration to one specific device — a one to one
load.
• As many device specific configurations to many specific devices on a one to
one basis — a many to many load.
• As one shared configuration to one or many devices of the same type — a
one to one or a one to many load.
Device Specific
Configuration
One Specific
Device
Device Specific
Configuration
One Specific
Device
Device Specific
Configuration
One Specific
Device
Device Specific
Configuration
One Specific
Device
Shared
Configuration
One Specific
Device
One Specific
Device
Shared
Configuration
One Specific
Device
One Specific
Device
One Specific
Device
or