User`s guide

9030944 E10 Loading a Configuration
5-7
Device Landscapes, Buttons, Codes, and Settings
attributes did not load. By printing out this list you can save it for further
analysis so that you can fix the problem.
• Viewing Load Results
After a load, you can view the load summary results in the Load Results
window and the load detail results (the attributes and the load status of
each) in the Load Detail and Rollback Failure windows.
For a device specific configuration example, see Figure 5-4 on Page 5-19
and Figure 5-5 on Page 5-20. For a shared configuration example, see
Figure 5-11 on Page 5-29 and Figure 5-12 on Page 5-30.
• Logging Load Results
The load summary results are stored in the SPECTRUM Event Log (see
Logging Load Results, on Page 5-31).
• Printing Load Results
After a load, you can print Load Results and Load Details for your records
and analysis (see Figure on Page 5-32).
• Modifying Load Failure Alarms
You can modify or turn off the Load Failure alarms that appear in
SPECTRUM (see What to Do When a Load Fails, on Page 5-35, and
Understanding and Modifying ECM Alarms in SPECTRUM, starting on
Page 9-9.)
Device Landscapes, Buttons, Codes, and
Settings
You should understand the following ECM Main window (the load window)
landscapes, buttons, status codes, and settings before you load a configuration:
• Device landscapes for locating configurations and devices
• Load button
• Clear Load-Status button
• Load status codes
• Load setting options
NOTE
An attribute which is READ-ONLY cannot be loaded. The detail result will
show operation is not applicable. This, however, does not affect the load
status of the configuration.