User`s guide

9030944 E10 Verifying a Configuration
6-13
Verifying the Cisco Host Configuration
Verifying the Cisco Host Configuration
ECM allows you to verify the Cisco host configuration commands when you
are verifying the configuration of devices. ECM verifies a Cisco host
configuration by comparing each line in the router file to the configuration file.
It displays both files, line by line, in the Verify Detail window. Any line that
does not match appears in a red band.
To verify a Cisco router host configuration:
1. Begin with the same verification procedures that you would use for any
device:
a. Select the type of configuration you want from the View menu of the
Main window.
b. Select the configuration(s) and device(s) you want to verify.
c. Click on the Verify button and click Yes to the confirmation prompt.
d. View the result.
2. When you access the Verify Results window, click on the Verify Detail
button or option.
ECM displays a Verify Detail window. Notice that the View menu includes
a Host Configuration option and an Attributes option. See Figure 6-9.
• The Host Configuration option in this window allows you to access the
verification details of the Cisco host configuration.
• The Attributes option allows you to view the attributes.
3. Click on the Host Configuration option in the View menu of the Verify
Detail window.
Figure 6-9. The Host Configuration Option in the Verify Detail Window
File View Setup
ECM: Verify Detail - Device Rtr_Cisco78 from iron
Device Attribute
✗ Gen_IF_Port 1 Community_Name
✓ Gen_IF_Port 1 Condition
✗ Gen_IF_Port 1 <Host Configuration>
Device Value: public
Configuration Value: invalid
Device Value: 2
Configuration Value: 2
Device Value: Use Host Configuration Pulldo
Configuration Value: Use Host Configuration Pulldo
Attributes
H
ost Configuration
3
Device Value
Configuration Value
View All View Differences