User`s guide

Viewing the Results of Scheduled Operations
SPECTRUM Event Log
Scheduling Tasks
8-14
Enterprise Configuration Manager
User’s Guide
Event Log, it contains a listing of attribute names and the status of
attributes, if appropriate.
The following two subsections describe these two log files in more detail.
SPECTRUM Event Log
The SPECTRUM Event Log provides a history of the events that occur on the
network. Therefore, when the Scheduler performs a scheduled ECM
operation, the results of the operation appear in the Event Log along with
other SPECTRUM events.
To access the SPECTRUM Event Log:
1. Open SpectroGRAPH to any View window — Topology View, DevTop View,
or Device View, for example.
2. In the View menu select the New View, Events option.
The Events option brings up a SPECTRUM Event Log, similar to that in
Figure 8-5 on Page 8-15.
The Event Log contains the following information:
• Date and time of the event.
• Application used.
• User’s name.
• Names of configurations, templates, and devices, if applicable, and the
landscapes where they are located.
• A text explanation of the event.
• Event code (refer to Interpreting ECM Event Code Numbers on Page 9-8).
You can identify ECM events in the Event Log because the words
“Configuration Manager” appear after the date and time.
NOTE
Both the manual ECM operations and the scheduled ECM operations are
logged in the SPECTRUM Event Log. However, only scheduled operations
are logged in the ECM Log file.
NOTE
The Event Log does not distinguish between operations performed directly
by the user and operations performed by the Scheduler.