User`s guide

9030944 E10 New Features
xxiii
New Feature Detail
New Device Specific Configuration View
New Device Specific Configuration View
You can now see in the ECM main window for device specific
configurations all device specific configurations for each device of the
same type in the pre-selected landscape.
For example, suppose your selected landscape contains three CISCO
routers, all of the same model type, type Rtr_Cisco, with router 1
having a CISCO 70, router 2 having a CISCO 75, and router 3 having
a CISCO 80. Say also that these three routers share configurations A,
B, C, and D. However, router 1 has two device-specific configurations:
E and F. Router 2 has one device-specific configuration: G. Router 3
has two device-specific configurations: H and I. The following diagram
illustrates this situation:
In ECM 4.0, you could see only one router’s device specific
configurations at a time. You could not see all the device specific
configurations in the selected landscape. In the situation illustrated in
the preceding figure, for example, this means the Main window for
Device Specific Configurations could show only the device-specific
configurations for the selected router (either only E and F if CISCO 70
was selected, only G if CISCO 75 was selected, or only H, and I if
CISCO 80 was selected).
In ECM 5.0, you can see at one time all the devices with all the device
specific configurations in the selected landscape. In the situation
illustrated in the preceding figure, therefore, you could see all the
device-specific configurations (E, F, G, H, and I) for each of the CISCO
hubs.
Similar Shared Configuration View
As in the previous version of ECM, from the Shared Configurations
View, you can see all the shared configurations for devices of the same
CISCO 70
CISCO 75 CISCO 80
1
2
3
A
B
C
D
E
F
A
B
C
D
G
A
B
C
D
H
I
Routers
Of
Same
Model
Type
Shared
Configurations
Device-Specific
Configurations