User`s guide

Installation Procedure
Installation/Deinstallation
A-4
Enterprise Configuration Manager
User’s Guide
Installation Procedure
Do the following procedure to perform either an auto or a custom installation
of Enterprise Configuration Manager. If you have SpectroGRAPH and
SpectroSERVER on different machines, install ECM on both machines.
Specify the ECM component (SG or SS) that you are installing in Step 6.
1. Before you install ECM, install SPECTRUM according to the instructions
in the SPECTRUM Installation Guide.
2. Log on to the workstation and become root (superuser).
3. Insert the CD and start the installation using the procedures in the
SPECTRUM Installation Guide.
A SpectroINSTALL dialog box asks you to confirm the installation.
4. In the SpectroINSTALL dialog box, press the OK button to continue with
the installation.
Install evaluates your system resources and displays the results in a Host
Evaluation dialog box.
5. If your system resources are adequate, press the OK button in the Host
Evaluation dialog box.
An Installation Configuration dialog box appears. See Figure A-1.