User`s guide
9030944 E10 Installation/Deinstallation
A-7
Installation Procedure
Figure A-2. Component Selection Dialog Box
8. Check the SS and SG status boxes in the Component Selection dialog box
to make sure that the correct ECM component information is in the boxes.
The letter Y should be under the component(s) that you are installing.
If the status is not correct, change the N to Y or vice versa by clicking in
the box.
9. Then click on OK in the Component Selection dialog box.
When you click on OK, you are returned to the Installation Configuration
dialog box. See Figure A-1.
10. In the Installation Configuration dialog box, click on the Start button.
After you click the Start button, a Main Location Server dialog box
appears.
11. At the prompt, enter the host name of the Main Location server and then
click on OK.
To set up the machine you are using as the Main Location Server, enter
the current host name.
Component Selection
Component DescriptionTotal KB of Disk Space Required: 10742
Select All
Deselect All
Selection Filters
Collapse All
This application allows a network administrator to change and monitor the
configuration of an extensive array of network elements from a central
location.
Help
ExitResetCancel
OK
Components Available for Installation:
F Part Name Status Part Type Descriptive Name Version SS SG EXT KB
- SA-CSI1008 DIST ManMod Enterprise Config Mgr for SPRM 5.0rev0 Y Y 10742
Expand All
Make sure the SS and SG status
boxes are correct.