User`s guide

9030944 E10 Installation/Deinstallation

A-11

Deinstallation

When you install Enterprise Conﬁguration Manager, Install deinstalls any

previous version of ECM. Therefore, you do not need to perform a

deinstallation before you install the application.

However, if you just want to remove ECM from your workstation (that is,

perform a stand-alone deinstallation), use the following procedure:

1. Log on as root to the workstation where SpectroGRAPH is installed.

2. Make sure SpectroSERVER is up and running—even if SpectroSERVER

is on another machine.

(If you cannot run SpectroSERVER, you will have to perform additional

procedures described in the section How to Manually Remove ECM

Models.)

3. Use the cd command to navigate to the SPECTRUM directory. (It is

important that you run the deinstall from this directory so that

pathnames are correct.)

4. Run the deinstallation script by typing:

<SPECTRUM_directory/ECM>/deinstall/deinstall

When you type this command, deinstall begins the deinstallation by

removing the ﬁles that make up the ECM SpectroGRAPH component.

5. Answer the prompts in the deinstallation script.

NOTE

The deinstallation script does not remove the two ECM model types,

ScmConﬁg and ScmTemplates, which are a part of the SPECTRUM

database.