User`s guide

How to Manually Remove ECM Models
Installation/Deinstallation
A-12
Enterprise Configuration Manager
User’s Guide
How to Manually Remove ECM Models
If you perform a deinstallation and SpectroSERVER is not running, you can
remove the ECM models manually. Follow these steps:
1. If you are not already on the machine where SpectroSERVER is located,
log on as root to this machine.
2. Navigate to the SS-Tools directory by typing:
cd /<SPECTRUM directory>/SS-Tools
3. Then type:
rm_ecm_models -vnm <SpectroSERVER host name>\
-lh <VNM landscape handle>\
-port <VNM socket number>\
[-time <timeout value>]
The deinstallation utility removes all the ECM models. Then it notifies
you that the deinstallation is complete with the message, “Enterprise
Configuration Manager has been de-installed.”
4. After this manual deinstallation, remove the rm_ecm_models utility,
itself. In the SS-Tools directory, type:
rm rm_ecm_models
5. To remove ECM models from other VNMs, repeat steps 1-4 for each VNM.
You have now removed all Enterprise Configuration Manager files.
Schedule Service Requirements for NT
Because NT utilizes the Schedule Service (instead of the cron utility) to
schedule ECM operations, NT users should make sure the Schedule Service is
set up properly before scheduling tasks. The setup requirements are described
in Chapter 8, Scheduling Tasks. Be sure to refer to this information when you
are setting up ECM on your NT system.