User`s guide

9030944 E10 Installation/Deinstallation

A-15

Installation Procedures Required by Cisco Routers

For NT Machines

Follow these steps to set up your NT machine to support TFTP.

1. Go to the TFTPBOOT directory. It is a main directory on the drive you

choose when you installed ECM. For example:

C:/TFTPBOOT

2. By double clicking on it, run the ﬁle TFTPSERVE.EXE

This starts the TFTP server and displays a dialog box similar to the

following.

The Start server button will be grayed out since the TFTP server will

be running.

3. You can click on the minimize or the Close button.

4. You may want to conﬁgure the Startup parameters so that the TFTP

server is started automatically when you reboot the NT machine. To do

this, click on Startup and select Automatic.

Start server Stop server Close

TFTP SERVER

Active transfers:

Completed transfers: