User`s guide

Navigating to Device Components
Getting Started Enterprise Configuration Manager
2-6 User’s Guide
7. Click on the Search tab and then specify in the resulting dialog box
whether you wish to activate (button recessed) the Enable Extended
Search option. When active, this feature automatically selects the first
match of either the Device name or the Attribute name found in the list;
otherwise, the search is done only on Device Name entries.
8. To apply the settings and close the Preferences dialog box, either click OK
or else click on Apply and then Cancel.
Completion of this sequence returns you to the ECM Main window. The
settings that you have just defined stay in effect for the current session.
Navigating to Device Components
When you first open ECM, the ECM Main window displays the configurations
for the device selected in SpectroGRAPH. However, ECM also allows you to
configure the components of the device, which may include applications,
interfaces, boards, and ports. If you want to work with only a component of the
device selected in SpectroGRAPH, continue with the additional steps in this
section.
Figure 2-3. The Navigate Components Option
1. In the ECM Main window, select the Navigate Components option
under the Options menu. See Figure 2-3.
The Components dialog box appears. See Figure 2-4. This dialog box
displays the components according to the relationship of the components
to the main device. The following rules determine the organization of the
components list:
• The main device appears flush left at the top of the list.
ECM: Main - Shared Configurations for cisco78 from iron
Configuration Version Load
Name Number Status
Source:
Time Created:
Created By:
Time Modified:
Modified By:
Time Loaded:
Loaded By:
Configuration Information
...
δφσδ
ηκ
ϕδ
ϕκλ γ
γ φδ
✔ xkxk
✘ eredr
✔uowst
✘ nzcs
χον
ηϕ
ηα
χον
ηκτ
ριγ
νφιγδσ
File View Options Setup Help
April
15
◆
κξκε γηγ
ρεδ ηϕκ
οωσο
ζχτ
iron
Case Sensitive
Search
Navigate Components...
Load...
Verify...
Compare
Schedule...
Clear Load Status
View Host Configuration...
External Applications
Preferences...
1