Specifications

9031111 E7 Application View

5-7

Isolated Repeater Application

Creating an Isolated Repeater

To reconﬁgure a selected repeater to a stand _alone mode (isolated), follow

these steps:

1. Within the Chassis Device view, select a desired Repeater MIM icon

(network B or C only).

2. From the Icon Subviews menu, select:

• For TPXMIM - Change Module Channel

• For other Repeater MIMs- Repeater -> Change Module Channel

to open the Change Module Channel view described in Chapter 2, Device

Views.

3. Within the Change Module Channel view, select Stand_Alone from the

Module Connection menu button.

4. From the File menu, choose Save All Changes.

To reconﬁgure the Application view to recognize the new repeater, follow these

steps:

1. Within the Application view, select Edit from the File menu to enter the

edit mode.

2. From the Edit menu, select Reconﬁgure.

3. Within the Rediscover Applications dialog box, click OK.

4. From the File menu, select Save & Close.

The Application view refreshes and the new CSIIsolRptr Icon appears.

NOTE

SPECTRUM also creates isolated repeaters when you insert a MIM into an

MMAC FNB non-shunting chassis, where a non-MIM module or empty slot is

to the right of the MIM module.