Specifications

9031111 E7 Application View
5-11
ATM Client Application
ATM Client Application Virtual Channel Link View
Transmit Size
Displays the maximum AAL5 CPCS SDU size in octets that is supported on
the transmit direction of this VCC. Transmit Size is implemented when the
local VCL endpoint is also the VCC endpoint, and AAL5 is in use. The
Transmit Size can be altered. The maximum allowable value is 155 Mbs
displayed in octets. To change the Transmit Size for a specific channel, do the
following:
1. Within the Virtual Channel Link table, double-click the selected channel’s
entry to open the ATM Switch Application Virtual Channel Link view.
2. Within the Transmit Size field, type the new Transmit Size number.
3. From the File menu, select Save All Changes.
Receive Size
Displays the maximum AAL5 CPCS SDU size in octets that is supported on
the receive direction of this VCC. Receive Size is implemented when the local
VCL endpoint is also the VCC endpoint, and AAL5 is in use. The Receive Size
can be altered. The maximum allowable value is 155 Mbs displayed in octets.
To change the Receive Size for a specific channel, do the following:
1. Within the Virtual Channel Link table, double-click the selected channel’s
entry to open the ATM Switch Application Virtual Channel Link view.
2. Within the Receive Size field, type the new Receive Size number.
3. From the File menu, select Save All Changes.
Encaps Type
Displays the type of data encapsulation used over the AAL5 SSCS layer.
Possible Encaps types are: Routed, Bridged_8023, Bridged_8025,
Bridged_8026, LAN_emulation_8023, LAN_emulation_8025,
LLC_Encapsulation, Frame_Relay_Sscs, other, and unknown. Encaps type is
implemented when the local VCL endpoint is also the VCC endpoint, and
AAL5 is in use. To change the Encaps Type for a specific channel, do the
following:
1. Within the Virtual Channel Link table, double-click the selected channel’s
entry to open the ATM Switch Application Virtual Channel Link view.
2. Select the desired type from the Encaps Type menu button.
3. From the File menu, select Save All Changes.
Cross Connect Id
Displays an Id for all associated VCLs and their cross-connections that are
identified by entries in the Cross Connect table. The Cross Connect Id is
initialized by the agent after the associated entries in the Cross Connect Table
have been created. The Cross Connect Id is implemented only for a VCL which
is cross-connected to other VCLs that belong to the same VCC.