Specifications

ATM Client Application
Application View EMME/EMM-E6
5-12 Management Module Guide
Row Status
Displays the row status used while creating, deleting or modifying a row in
this table. Possible menu selections are: active, not_in _service, not_ready,
create_and_go, create_and_wait, and destroy. To change the Row Status for a
specific channel, do the following:
1. Within the Virtual Channel Link table, double-click the selected channel’s
entry to open the ATM Switch Application Virtual Channel Link view.
2. Select the desired status from the Row Status menu button.
3. From the File menu, select Save All Changes.
The Row Status Procedure area of the ATM Client Application Virtual
Channel Link view provides the following information and fields that allow
you to create or remove a virtual channel link from the Virtual Channel Link
table.
Channel Information
Allows you to type If Index number, VPI number, and the VCU number for the
channel you wish to create or remove.
Allows you to add a new virtual channel to the Virtual Channel Link table.
Allows you to remove an existing virtual channel from the Virtual Channel
Link table.
To create or remove a virtual channels from the Virtual Channel Link table,
follow these steps:
1. Set channel information by typing the If Index number, the VPI number,
and the VCI number of the channel you want to add or remove in the
Channel Information field. The numbers should be separated by periods.
2. Perform the view update by pressing enter or ctrl+s.
3. Select Create Channel or Remove Channel.
4. Within the Virtual Channel Link table, select Update.
Create Channel
Remove Channel