Specifications

9031111 E7 Device Views
2-7
Chassis Device View
EMME/EMM-E6 Module Icon
EMME/EMM-E6 Module Identification Labels
These labels provide the following information (refer to Figure 2-1 and
Figure 2-3):
Slot Number
Displays the number of the MMAC FNB slot that the module is connected to.
Double-click this area to open the Notes view described in SPECTRUM
Views.
Model Type
Identifies the type of module in this MMAC FNB slot (e.g., EMM-E6).
Double-click this area of the EMME to open the Model Information view.
Double-click this area of the EMM-E6 to open the EMME/EMM-E6 Device
Configuration View described in Chapter 3, Configuration Views.
EMME/EMM-E6 Chassis Module Icon Subviews Menu
Table 2-1 lists each of the device-specific Icon Subviews menu selections
available for EMME/EMM-E6. See Chapter 1, Introduction, for information on
Accessing Device-Specific Subviews.
Table 2-1. EMME/EMM-E6 Module Icon Subviews Menu
Menu Selection Description
Module Notes Opens the Notes view described in SPECTRUM
Views.
EMME/EMM-E6 Application Opens the Device Application View described in
Chapter 5, Application View.
EMME/EMM-E6 Configuration Opens the EMME/EMM-E6 Device Configuration
View described in Chapter 3, Configuration Views.
EMME/EMM-E6 Model
Information
Opens the EMME/EMM-E6 Model Information
view described in the SPECTRUM Views.
EMME/EMM-E6 Front Panel
Redundancy
Opens the EMME/EMM-E6 Front Panel
Redundancy view described in the SPECTRUM
Portable Management Application for the
EMME User’s Guide or the SPECTRUM
Portable Management Application for the
EMM-E6 User’s Guide.
Chassis Configuration
(EMME only)
Opens the Chassis Configuration View (EMME
only) described in Chapter 3, Configuration Views.
Application Display Opens the Application Display submenu, allowing
you to chose the application to be displayed e.g.,
Physical (MIB-II) or Bridging.
Gauge Control Panel Opens the Gauge Control Panel described in this
chapter.