Specifications

Chassis Device View
EMME/EMM-E6 Module Icon
Device Views EMME/EMM-E6
2-8 Management Module Guide
Application Label
Application label provides access to the Icon Subviews menu for the
application displayed (refer to Figure 2-2 and Figure 2-3). Double-click the
Application label to open the Performance view described in SPECTRUM
Views. The application selected determines the information displayed and the
menu selections available. To select the application, highlight the Chassis
Logical Module and select View -> Icon Subviews -> Application Display.
The default application for this view is Bridging.
Table 2-2 describes the Bridging Application Icon Subviews menu selections.
See Chapter 1, Introduction, for information on Accessing Device-Specific
Subviews. There are no specific Icon Subviews menu selections for the
Physical Application.
Table 2-2. Bridge Menu Selections
Menu Selection Description
Bridge Performance Opens the Performance view described in SPECTRUM
Views.
Bridge Detail
(for EMM-E6 only)
Opens the Detail view described in MIB II Applications,
Bridging Applications, and Miscellaneous
Applications.
Bridge Model Information Opens the Model Information view described in
SPECTRUM Views.
Spanning Tree
Information
Opens the Spanning Tree Information view described in
MIB II Applications, Bridging Applications, and
Miscellaneous Applications.
Static Database Table Opens the Static Database Table view described in MIB
II Applications, Bridging Applications, and
Miscellaneous Applications.
Transparent Bridge Info Opens the Transparent Bridge Information view, with
Forwarding Database and Port Tables described in MIB
II Applications, Bridging Applications, and
Miscellaneous Applications.