Specifications

Chassis Device View
EMME/EMM-E6 Module Icon
Device Views EMME/EMM-E6
2-10 Management Module Guide
EPIM Ports
These labels represent the connection to the EPIM ports located on the front
panel of the device, which direct traffic to one of two external Ethernet Port
Interface Modules (EPIMs). One D port is operational (FWD) while the other
D port is redundant (STBY) or inactive (OFF). See Table 2-3 for interface
status label descriptions.
Table 2-5 lists the Subviews menu selections available from this label. See
Chapter 1, Introduction, for information on Accessing Device-Specific
Subviews.
BRIM Port
This label represent the connection to one of two BRIM ports located on the
front panel of the EMME/EMM-E6, which direct traffic to the optional
external Bridge/Router Interface Module (BRIM). A second interface provided
by the other BRIM port (forming channel F) will be implemented in the future.
Table 2-4. Interface Status for the Physical or MIB II Application
Color Status Description
Green ON Port is operational.
Blue OFF Port is disabled.
Yellow TST Port is in the test mode.
Table 2-5. AUI Port Subviews Menu
Menu Selection Description
Redund Configuration Opens the Front Panel Redundancy view described in the
SPECTRUM Portable Management Application for
the EMME User’s Guide or the SPECTRUM Portable
Management Application for the EMM-E6 User’s
Guide.
Configuration Opens the Configuration dialog box, which allows you to
enable or disable bridging for the selected port.