Specifications

Chassis Device View
Device Views EMME/EMM-E6
2-16 Management Module Guide
Repeater Port Status
This label indicates the port activity status. Double-click the Repeater Port
Status label to access the Performance view described in SPECTRUM Views.
BRIM Label (exclusive to EMM-E6)
This label represents the interface to which EMM-E6 provides bridging or
routing capabilities through the additional BRIM connections on the front
panel of the device. Depending on the BRIMs connected to the device, the
EMM-E6 can supply one additional interface (channel “E”) configured to
provide bridging or routing to Ethernet, FDDI, or ATM networks. An EMM-E6
equipped with an Ethernet BRIM will not display a separate Ethernet label.
FDDI Label
This label represents the FDDI application and signifies that the EMM-E6 is
configured to provide additional bridging or Feeder Node Routing on FDDI.
The FDDI label provides access to the FDDI application-specific Icon
Subviews menu. Table 2-8 describes all menu selections accessible from this
label. See chapter 1, Introduction, for information on Accessing Device-Specific
Subviews.
Double-click this label to open the Performance view described in
SPECTRUM Views.
Table 2-8. FDDI Label Icon Subviews Menu
Menu Selection Description
FDDI Performance Opens the Performance view described in SPECTRUM
Views.
FDDI Configuration Opens the SMT Device Configuration View described in
Chapter 3, Configuration Views.
FDDI Station List Opens the FDDI Station view described in MIB II
Applications, Bridging Applications,
andMiscellaneous Applications.
FDDI Model
Information
Opens the SMT Model Information view described in
SPECTRUM Views.
Hub Detail Opens the FddiSMT Detail view described in MIB II
Applications, Bridging Applications, and
Miscellaneous Applications.