Specifications

Chassis Device View
Device Views EMME/EMM-E6
2-18 Management Module Guide
BRIM Port Label
This label identifies the port on the front panel of the BRIM. BRIMs with a
single front panel port do not display BRIM Port labels (e.g., ATM) therefore
their BRIM Channel represents the entire BRIM connection (refer to
Figure 2-3).
The BRIM Port label provides access to the Icon Subviews Menu described in
Table 2-10. See chapter 1, Introduction, for information on Accessing
Device-Specific Subviews.
BRIM Port Type Label
This label consists of two fields: the number field and the letter field. The
number field displays the number assigned to this BRIM port. The letter field
displays the type of this port.
Double-click the number field of the BRIM Port Type label to access the Notes
view described in SPECTRUM Views.
BRIM Port Status Label
This label indicates the port activity status. All possible states and their color
definitions are described in Table 2-11.
Table 2-10. BRIM Port Label Subviews Menu
Menu Selection Description
Port Notes Opens the Notes view described in SPECTRUM Views.
Enable/Disable Port Opens a dialog box which allows you to enable or disable a
selected port.
Port Configuration View Opens the Port Configuration view described in Chapter 3,
Configuration Views.
Table 2-11. BRIM Port Status Descriptions
Color State Description
Green ACT active
Blue DIS disabled
Yellow CON connecting
Red SBY standby