Specifications

9031111 E7 Device Views
2-21
Chassis Device View
MIM Icon
Module Channel or Isolation Station
Displays the network/channel that the module is connected to. If the module is
in the stand-alone mode, “StandAlone” is displayed. If more than one channel
is in use by the module, “StandAloneX” or “NetworkX” is displayed.
Double-click this area to access the Performance view described in
SPECTRUM Views.
Module Type
Displays the type of module in this MMAC FNB slot (e.g., FOM-22).
Double-click this area to access the Module Configuration view described in
Chapter 3, Configuration Views.
MIM Icon Subviews Menu
Table 2-12 describes each of the module-specific Icon Subviews menu
selections available for the Repeater module. Table 2-13 describes a submenu
accessible by clicking the Repeater option of the Icon Subviews menu. See
Chapter 1, Introduction, for information on Accessing Device-Specific
Subviews.
Table 2-12. MIM Icon Subviews Menu
Menu Selection Description
Module Notes Opens the Notes view described in SPECTRUM Views.
Serial Number Opens the dialog box allowing you to enter or alter the
serial number for the selected module.
Module Configuration Opens the Module Configuration view described in Chapter
3, Configuration Views.
Module Performance Opens the Performance view described in SPECTRUM
Views.
Module DevTop View Opens the Device Topology view described in SPECTRUM
Views.
Repeater Opens a submenu described in Table 2-13.