Specifications

9031111 E7 Device Views
2-27
Chassis Device View
TPXMIM
TPXMIM Identification Labels
These labels provide the following information (refer to Figure 2-5):
Slot Number
Displays the number of the MMAC-FNB slot that the module is connected to.
Double-click this area to open the Notes view described in SPECTRUM
Views.
Module Channel or Isolation Station
Displays the channel that the module is connected to. If the module is in the
stand-alone mode, “StandAlone” is displayed. If more than one channel is in
use by the module, “StandAloneX” or “NetworkX” is displayed.
Module Type
Displays the type of module in this MMAC FNB slot (e.g.,TXMIM 22).
TPXMIM Icon Subviews Menu
Table 2-15 describes each of the module-specific Icon Subviews menu
selections available for the TPXMIM. Table 2-16 describes the submenu
accessible for each channel listed under the Module Segment Detail option.
See Chapter 1, Introduction, for information on Accessing Device-Specific
Subviews.
Table 2-15. TPXMIM Icon Subviews Menu
Menu Selection Description
Module Notes Opens the Notes view described in SPECTRUM Views.
Serial Number Opens a dialog box allowing you to enter or alter the serial
number for the selected module.
Enable All Ports Opens a dialog box allowing you to enable or disable all
ports located on a selected module.
Change Module Channel
(Channel B & C only)
Opens the Change Module Channel View (RMIMs only)
described earlier in this in this chapter.
Module Segment Details Allows you to access a submenu for each channel (A, B, and
C) being used. Table 2-16 lists the menu selections for these
channels.